### Ohm"s Law is one of the most fundamental of laws for electrical theory. The Ohms Law formula or equation links voltage and current to the properties of the conductor, i.e. its resistance in a circuit.You are watching: What is the peak current if the resistance r is doubled?

Resistance Tutorial Includes:What is resistance Ohms Law Ohmic & Non-Ohmic conductors Resistance of filament lamp Resistivity Resistivity table for common materials Resistance temperature coefficient Electrical conductivity Series & parallel resistors Parallel resistors table Ohm"s Law is one of the most fundamental and important laws governing electrical and electronic circuits. It relates relates current, voltage and resistance for a linear device, such that if two are know, the third can be calculated.

With current, voltage and resistance being three of the major circuit quantities, this means that Ohm"s Law is also immensely important.

Ohm"s Law is used within all branches of electrical and electronic science. It is used for calculating the value of resistors required in circuits, and it can also be used for determining the current flowing in a circuit where the voltage can be measured easily across a known resistor, but more than this, Ohm"s Law is used in a vast number of calculations in all forms of electrical and electronic circuit- in fact anywhere that current flows. ## Ohm"s Law discovery

There is a mathematical relationship which links current, voltage and resistance. A German scientist named Georg Ohm performed many experiments in an effort to show a link between the three. In the days when he was performing his experiments there were no meters as we know them today.

Only after considerable effort and at the second attempt did he manage to devise what we know today as Ohm"s Law.

Note on Georg Ohm:

Born in Erlangen, about 50 miles north of Munich in 1879, Georg Ohm went on to become one of the people who investigated much about the new science associated with electricity, discovering the relationship between voltage and current in a conductor - this law is now named Ohm"s Law, honouring the work he did.

## What exactly is Ohm"s Law?

Ohm"s Law describes the way current flows through a material when different levels of voltage are applied. Some materials like electrical wires present little resistance to the current flow and this type of material is called a conductor. Hence if this conductor is placed directly across a battery for example, a lot of current would flow.

In other instances another material may impede the flow of current, but still allow some though. In electrical circuits, these components are often called resistors. Yet other materials let virtually no current though and these materials are called insulators.

Check out our video on Ohm"s Law

Ohm looked at the way current flowed in various materials and he was able to develop his law which we now call Ohm"s Law.

To gain a first idea of what is happening it is possible to liken the electrical situation to that of water flow in a pipe. The voltage is represented by the water pressure the pipe, the current is represented by the amount of water flowing through the pipe, and finally the resistance is the equivalent of the size of the pipe.

It can be imagined that the wider the pipe, the more water will flow. The reason for this is that it is easier for more water to flow through a wider pipe than a narrower one - the narrower one presents more resistance to the water flow. Also if there is more pressure into e pipe, then for the same pipe, more water will flow.

Ohm determined that for normal materials, doubling the voltage doubled the current flow for a given component. Different materials or the same materials with different shapes will present different levels of resistance to the flow of current.

## Ohm"s Law definition

Ohm"s Law states that the current flowing in a circuit is directly proportional to the applied potential difference and inversely proportional to the resistance in the circuit.

In other words by doubling the voltage across a circuit the current will also double. However if the resistance is doubled the current will fall by half.

In this mathematical relationship the unit of resistance is measured in Ohms. ## Ohm"s Law formula

The Ohm"s Law formula or equation is very straightforward.

Ohm"s law can be expressed in a mathematical form:

V = I R
Where: V = voltage expressed in Volts I = current expressed in Amps R = resistance expressed in Ohms

The formula can be manipulated so that if any two quantities are known the third can be calculated.

I = V R

## Ohm"s law triangle

To help remember the formula it is possible to use a triangle with one side horizontal and the peak at the top like a pyramid. This is sometimes known as the Ohm"s law triangle.

In the top corner of the Ohms law triangle is the letter V, in the left hand corner, the letter I, and in the right hand bottom corner, R. To use the triangle cover up the unknown quantity and then and then calculate it from the other two. If they are in line they are multiplied, but if one is on top of the other then they should be divided. In other words if current has to be calculated the voltage is divided by the resistance i.e. V/R and so forth. If the voltage has to be calculated then it is found by multiplying the current by the resistance i.e. I x R.

## Ohms Law calculation example

If a voltage of 10 volts is placed across a 500 ohm resistor determine the amount of current that will flow. Looking at the Ohms Law triangle the current is the unknown leaving the voltage and resistance as the known values. In this way the current is found by dividing the voltage by the resistance.

I   =   V R   = 10 500 = 0.02 A = 20 m A

## Ohmic and non-ohmic conductors

Using Ohm"s law it can be seen that if the voltage and current were plotted for a fixed resistor or a length of wire, etc, there would be a straight line.

It can be seen that doubling the voltage doubles the current that passes through the particular circuit element. Plot of voltage and current for a linear resistance

On the graph, there are two lines, one for a higher resistance - this one requires more voltage to be applied for a given current flowing. Accordingly this must have a higher resistance. Conversely the curve for the lower resistance shows a component that requires a lower voltage to be applied for a given current.

Components that have a linear or straight line follow Ohms law and they are known as Ohmic conductors. However, not all electrical electronic components have a straight line plot for voltage and current. For a variety of reasons they may have a different voltage / current characteristic. These conductors are often said to be non-Ohmic.