If your A/C sound loud once you revolve it all the way up or the smells funky, it could be time to change your cabin waiting filters. Here"s just how you execute it.

You are watching: Replace cabin air filter honda accord


This article applies to the Honda Accord (1990-2002).

Cabin waiting filters protect your car"s ventilation system from gift contaminated or exposed to airborne pollen, bacteria, dust, exhaust gasses, and even smoke. Manufacturers recommend changing the cabin air filters every 25,000 mile or so, however if you have actually allergies, you might want to change them on an yearly basis. They room very an easy to replace on your own.


Step 1 – remove black clips and glove box

First you will should open the gloves box and remove every little thing in it.

Then, remove each the the black color clips located inside and toward the ago of the gloves box. One way to eliminate the clips is come hold and also squeeze each one by hand and push ~ above the clip native the outside. Girlfriend can additionally use a flat head driver to pry the clips out, however this is risky because too much pressure can damages or break the clip. Host the gloves box in place. When you remove the clips, that will loss forward. Removed of the gloves box allows accessibility to the wait filters.

*
Figure 1. Empty your gloves box.
*
Figure 2. Eliminate the black clips stop the gloves box in place.
Pro Tip

If one or both clips autumn behind the dashboard, friend can easily reach them as soon as the glove box is removed.


Step 2 – eliminate cabin air filter cover

Remove the cabin air filter cover by pulling ~ above the left-hand side tab. The sheathe is situated to the appropriate of number of multicolored wires. The cabin air filter cover should pop out.

*
Figure 3. Eliminate cabin waiting filter cover.

Step 3 – slide cabin air filter out

Remove the air filter by slide them and also their frames out. The filters are positioned alongside each other. First, pull the left-side tab outward and also remove the left wait filter. Then slide the right-side tab and air filter come the left filter"s position. Remove this filter through pulling top top its tab. The filters should be dirty, therefore be certain not come touch the filter itself.

*
Figure 4. Remove both cabin waiting filters.

Step 4 – remove old filters and also insert new ones

Remove every cabin filter from its frame. Place the brand-new air filters right into each frame.

*
Figure 5. Eliminate old cabin wait filter native its frame.
Pro Tip

Before removing the filter indigenous its frame, note exactly how it"s positioned. This will assist you correctly insert the brand-new filter into the frame. Many filters have an arrowhead that suggests which next is challenged up.


Step 5 – Insert new cabin air filters

Insert the filter that will certainly be on the right-hand next first. Slide it to the right by its tab. Next, insert the left-hand side filter, which should fit snugly in place.

*
Figure 6. Insert both cabin waiting filters, one at a time.

Step 6 – install air cabin filter cover

Position the wait cabin filter cover above the opening. Insert the right-hand side of the cover into the slit. Press down top top the left-hand next of the cover come snap it into place.

See more: Water Heater Thermocouple Left Hand Thread Thermocouple, Left Hand Thread Thermocouple

Step 7 – Re-install black plastic glove box clips

With the glove box back into place, place one clip onto the slot within the gloves box. If holding the clip in place, nearby the glove box as lot as girlfriend can. Push the clip v its slot till you hear the snap into place. Follow the very same procedure v the various other clip. Make certain the glove box opens and closes together it should.