By trial and error, i have found a good way to remove the door dashboard from a 2002 Ford explorer (and other comparable years).

You are watching: 2003 ford explorer door panel removal

The very first two steps can be excellent in either order, but doing lock in the order i have listed below will avoid damage and also scratches to the paneling.

Step 1 Removing panel #1

First, the small panel behind the door handle/lock requirements to it is in removed. There are two clips located on the forward section of the panel; wedge a flathead screwdriver behind this section of the panel and pry it loose. As soon as it is loose, you can use your fingers to traction it the remainder of the method out. Doing this step very first makes removing the next piece a many easier.

Step 2 Removing panel #2

Secondly, the window mechanism. In ~ this point, through the paneling behind the door take care of removed, it must be less complicated to remove the window mechanism dashboard (Panel #1 to be holding panel #2 in place). Remove Panel #2 through grabbing it v your fingers and also pulling up and also forward. If that can"t be pulled v your fingers, wedge a flathead screwdriver behind the panel and also pry that outward and also pull up and forward. The key clip that requirements to be freed is top top the middle inner part of the panel. The other two clips are little clips ~ above the external of the panel.

TipThere is a item of plastic on the earlier end the the panel that slides in ~ the armrest—this is the reason you need to slide it forward instead of just lifting the up. Doing the in this way prevents damage to the paneling.

Step 3 Disconnecting the Wires

To disconnect the wires, simply location a flathead screwdriver simply beneath the tab that holds the clips in place. Merely push in and pry up. The cable clips must pop free. Set the home window mechanism panel off to the side.

Step 4 removed the entire Panel

To remove the entire panel and expose the speakers and door handle, there are three 7/16" hex screws that must be gotten rid of (a 7/16" socket and also extension operated just fine because that me). The an initial screw is behind the window mechanism dashboard (this is the one that requires the extension). Be sure to seize the screw v your fingers as soon as it is practically out to stop dropping the behind the panel. The last 2 screws are at the bottom the the door panel and are easy enough to remove. When complete, elevator upward top top the door panel and also pull outward. Now you room done.

TipThe stuff behind the paneling is acoustic shielding to protect against your door panelings from rattling at high speed or with really larger speakers—try no to rip it. If you have to take it off to acquire to the widow motor, or if you"ve ripped it, you have the right to pick up new stuff at any kind of electronics store that sells automobile audio stuff.

Step 5 Reinstalling the Panel

Reverse every steps detailed above come reinstall the panel. Refer to the pictures below if over there is any type of confusion.

See more: In A Database A Group Of Related Records Is Referred To As A



(1) good view of all the clips top top this panel. (3) Screws #2 and #3. (4) keep in mind the piece of plastic that slides under the armrest. (5) note where the screwdriver is located to pry out the electrical clip. (6) keep in mind the white item at the earlier (Screw #1).

Want to master Microsoft Excel and also take your work-from-home job prospects to the following level? Jump-start her career through our Premium A-to-Z Microsoft Excel cultivate Bundle native the new Gadget hacks Shop and also get lifetime accessibility to an ext than 40 hours of an easy to advanced instruction on functions, formula, tools, and more.