thaghost87

RegisteredLocation:philadelphiaCar Model/Year: 2000 Cadillac Seville STSEngine: Northstar 4.6L V8 (LD8/L37)


You are watching: 2002 cadillac deville intake manifold removal

I have actually a vacum leak, caddy claimed its from my intake gaskets and also the plenum duct. They want $400 to change both. Is either of these jobs complicated to do? any type of tips on this job, pics that the intake gasket? i read that the intake has to be eliminated to replace the plenum, yet else is over there that has to be done? are there any other materials that i need to inspect, or replace once doing this job?


Location:NortheastInterests:Northstar, Cadillac, Computers, Electronics, Tools, Pools, vehicle Model/Year: 96 Deville retired, 97 ETCEngine: Northstar 4.6L V8 (LD8/L37)

Dana, us can post the procedure because that you. Girlfriend will require an inch pound talk wrench and the tightening sequence. Where room you in Philadelphia? I have to make a expedition to check out my Aunt soon, maybe I have the right to come by when you execute this, can"t promise but maybe.

You will require a fuel heat disconnect tool

I think you have actually cop ignition

you will have to pull the injector rail (not bad), perform not attempt to clean the injector tips and you could buy injector o-rings

If girlfriend recall the starter is under the intake.

This is a issue of moving everything out the the way, removed the input bolts, detaching the plenum duct and lifting the intake

you will need to examine the intake for damage due to the fact that they had the engine out

How considerable is your tool set?

Mike


Pre-1995 - DTC codes OBD1 >>

1996 and newer - DTC password OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes chathamtownfc.net how To technical Archive >> http://www.chathamtownfc.net.com/wordpress/cadillac-how-to-faq/

Cadillac history & Specifications Year by Year http://www.motorera.com/cadillac/index.htm


Link to commentShare on other sitesMore sharing options...
*
Location:NortheastInterests:Northstar, Cadillac, Computers, Electronics, Tools, Pools, vehicle Model/Year: 96 Deville retired, 97 ETCEngine: Northstar 4.6L V8 (LD8/L37)


See more: What Enzyme Connects The New Bases To The Old Bases In The Dna Template

Posted July 9, 2008

Hmm, I watch you are near Cobbs Creek, I offered to pat baseball through my Dad in Cobbs Creek close to Springfield Avenue as soon as I to be a kid, I used to ride my bike indigenous 47th and also Springfield to Cobbs Creek...

Here is the procedure

2000 Cadillac Seville

--------------------------------------------------------------------------------

Intake Manifold Removal

Remove the brake booster water tap from the throttle body.

Remove the fuel press regulator vacuum pipe from the fuel push regulator and the water crossover.

Remove the PCV new air feed pipe from the camshaft cover and also the throttle body.

Remove the PCV dirty air tube from the PCV valve and the input manifold.

Disconnect the fuel injector electrical connectors (1) indigenous the fuel injectors. (someone discuss this, is this necessary, or will the injectors popular music out through the electrical harness attached choose on mine 96)